WEKO3
インデックスリンク
アイテム
Superplastic deformation in carbonate apatite ceramics under constant compressive loading for near-net-shape production of bioresorbable bone substitutes.
https://asahi-u.repo.nii.ac.jp/records/3348
https://asahi-u.repo.nii.ac.jp/records/33481b4557ea-6093-4e5a-bb65-2bbf51fb0623
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
02874547_27_9398_2008 (1.8 MB)
|
.png)
|
| Item type | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2015-04-15 | |||||
| タイトル | ||||||
| タイトル | Superplastic deformation in carbonate apatite ceramics under constant compressive loading for near-net-shape production of bioresorbable bone substitutes. | |||||
| タイトル | ||||||
| タイトル | Superplastic deformation in carbonate apatite ceramics under constant compressive loading for near-net-shape production of bioresorbable bone substitutes. | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Absorbable Implants | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Apatites | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Bone Substitutes | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Ceramics | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Crystallography | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Elasticity | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Hardness | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Hot Temperature | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Humans | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Materials Testing | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Microscopy, Electron, Scanning | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Particle Size | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Pressure | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Stress, Mechanical | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Surface Properties | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | X-Ray Diffraction | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | journal article | |||||
| 著者 |
Adachi, Masanori
× Adachi, Masanori× Wakamatsu, Nobukazu× Doi, Yutaka |
|||||
| 所属 | ||||||
| Department of Dental Materials and Science, Division of Oral Functional Science and Rehabilitation, Asahi University School of Dentistry | ||||||
| 所属 | ||||||
| Department of Dental Materials and Science, Division of Oral Functional Science and Rehabilitation, Asahi University School of Dentistry | ||||||
| 所属 | ||||||
| Department of Dental Materials and Science, Division of Oral Functional Science and Rehabilitation, Asahi University School of Dentistry | ||||||
| 書誌情報 |
en : Dental materials journal 巻 27, 号 1, p. 93-98, 発行日 2008-01-01 |
|||||
| 出版者 | ||||||
| The Japanese Society for Dental Materials and Devices (JSDMD) | ||||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | To produce carbonate apatite (CAP) ceramics with the desired complex shapes using superplastic deformation, deformation behavior of CAP ceramics under constant loading as well as physical properties after deformation were evaluated. Sintered CAP ceramics were plastically deformed in an electric furnace attached to a universal hydraulic testing machine under a constant load. CAP ceramics subjected to an initial compressive pressure of 10 MPa showed an appreciable amount of plastic deformation at temperatures ranging from 720 to 800 degrees C. Plastic deformation increased with increasing temperature from about 10% to 70% after two hours of loading. X-ray diffraction analysis and SEM observation further revealed that some CAP crystals were elongated and aligned with the c-axis normal to the loading direction during superplastic deformation. It was thus concluded that a marked plastic deformation of about 70% at 800 degrees C would be sufficient for near-net-shape production of bioresorbable CAP bone substitutes with complex shapes. | |||||
| 内容記述 | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | To produce carbonate apatite (CAP) ceramics with the desired complex shapes using superplastic deformation, deformation behavior of CAP ceramics under constant loading as well as physical properties after deformation were evaluated. Sintered CAP ceramics were plastically deformed in an electric furnace attached to a universal hydraulic testing machine under a constant load. CAP ceramics subjected to an initial compressive pressure of 10 MPa showed an appreciable amount of plastic deformation at temperatures ranging from 720 to 800 degrees C. Plastic deformation increased with increasing temperature from about 10% to 70% after two hours of loading. X-ray diffraction analysis and SEM observation further revealed that some CAP crystals were elongated and aligned with the c-axis normal to the loading direction during superplastic deformation. It was thus concluded that a marked plastic deformation of about 70% at 800 degrees C would be sufficient for near-net-shape production of bioresorbable CAP bone substitutes with complex shapes. | |||||
| ISSN | ||||||
| 収録物識別子タイプ | ISSN | |||||
| 収録物識別子 | 0287-4547 | |||||
| PubMed番号 | ||||||
| 関連タイプ | isIdenticalTo | |||||
| 識別子タイプ | PMID | |||||
| 関連識別子 | 18309617 | |||||
| フォーマット | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | application/pdf | |||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||
